Cold Metals Lab
V1.0 11/7/2017
Main Controls
Cycle Start: Starts any code loaded on the main screen
Single Block: Runs your code line by line
Feed Hold: Stops movement in the XYZ while a program is running but does not stop the spindle, and
pauses location in the code. Click cycle start to resume.
Coolant: Turns flood coolant on and off. Typing M08 into the MDI will turn on flood coolant. Typing M07
will turn on the Mist (or air if knob is adjusted)
M01 Break: Pauses a running program between tool changes. You will need to click cycle start after
pauses.
Stop: Stops the program and movement entirely. You will loose your position in the code if you need to
restart.
Reset: Used to reset digital communication after a power off
Estop Button (physical): Kills all power and air to the machine. You will lose all position data and have to
restart from beginning of tool path.
