Cold Metals Lab
V1.0 11/7/2017
Remove/Number Box - Used to delete ATC stored tool number entered, The ATC will fetch tool entered
and remove digital home from carousel, you must remove tool from spindle/machine manually
following this button.
ATC Rev/ATC FWD - Will fetch the next tool stored in the spindle in fwd or rev
Touch off Entire Tray - used in conjunction with the tool setter, will cycle through the entire tray to
measure each tools
Store Current Tool - Will use the ATC to store the tool currently in the spindle to its home in the ATC
T# (bottom right corner) - Identifies the tool currently in the spindle, also used to fetch and store tools
•
Tool 0 is an empty spindle
•
If you change from a 0 to a number in the ATC it will fetch that tool
•
If you change from a 0 to a number not in the ATC it will think it's holding that tool
•
If you change from a tool number stored in the ATC to a number stored in the ATC it will put away
the current tool in the ATC and Fetch the new tool number entered. Entering zero will put away
the current tool and leave an empty spindle.
•
If you change from a tool number stored in the ATC to a number not stored in the ATC it will put
away the current tool in the ATC and allow you to load the new tool
