Form # 20011001
To add mid section to end frame, connect the two perimeter poles to the
completed half of the end frame. This will establish the location for
alignment of the next arch assembly.
Build arch assembly in the same method as in Steps 2, 3, and 4. Brace
bar and/or scissors truss or cross cable must be installed in the same
methods as outlined in Steps 5 and 6.
QUICK PIN
QUICK PIN
Assembly Instructions
30 - 40 Wide
Step 18
Step 19
Step 20
Install ridge rafter as shown. Pivot man, as in illustration below, will
stay with this pole until it is raised and installed onto the crown cluster
and quick pinned.
Step 21
( 7 )
AIFT 30/40