Form # 20011001
Next, connect the hip pole brace tube to the Intermediate
bracket as shown with a 3/8" D-clasp pin. Hold pole
firmly so that it wil not drop. This could damage the eye
end.
Connect remaining end of hip pole brace to the hip pole
connector as show. Please note that it may be necessary to
push up on hip pole to locate D-clasp pin to lock hip pole
into place. Repeat procedure for the remaining hip pole
braces.
View of completed frame with hip pole brace bars in place.
Now is the time to check that frame is square with installation
site. Shift as necessary to properly align before completing
frame assembly. As you add components frame becomes
heavier and more rigid making it difficult to move around.
Keder Rafter
Intermediate
Bracket
D-Clasp Pin
D-Clasp Brace Bar
to Connector
Step 17
Step 16
Assembly Instructions
30 - 40 Wide
View of completed end frame prior to installation of hip pole brace bars (40 Wide). This would be a completed end frame
on a 30 Wide tent. Please note that 30 Wide Future Trac tents do not use cross or scissors truss cables.
Note: 30 Wide Future Trac frame tents
do not have hip pole brace kits and
these steps are eliminated.
( 6 )
AIFT 30/40
