TOPP S200, Instructions For Installation And Use Manual

Page: 8 / 32

8
S200
instructions for installation
11
22
33
44
SLIDING PULLING ARM INSTALLATION
The automation must be fixed on the side of the hinge.
The distance «A» varies according to the type of the Axle extension used see
table.
The automation must be fixed on the side of the hinge.
The distance «A» varies according to the type of the Axle extension used see
table.
fixing plate
Door edge
fixing plate
Door edge
COMPONENTS
1- Cover, triangular plates
and 6 fixing screws
2- Automation S200
3- Fixing plate
4- Automation fitting nuts
5- Sliding arm *
6- Axle extension and
corresponding screw (optional) *
* Supplied separately
Automation positioning with left hinge
Attention to the arrow on the fixing plate, the door edge
and the axis of rotation of the door
Automation positioning with right hinge
Attention to the arrow on the fixing plate, the door edge
and the axis of rotation of the door