TOPP S200, Instructions For Installation And Use Manual

Page: 3 / 32

3
S200 -AUTOMATION FOR SWING DOORS
The Automation S200 for hinged doors is designed and produced in accordance to the European standard EN16005.
It is designed to for indoor installation only. The automation is an electromechanical type servo-assisted by a spring that
ensures the closure in case of lack of electric and battery power.
The mechanical and electronic technology guarantees safely the management and synchronization of swing doors with
single and double panel.
The automation can be used in the pull inward configuration with sliding or elbow arm, and in the push outward configura -
tion with normal arm.
The symmetrical feature of the automation facilitates the installation process.
The opening and closing movement of the door is regulated by the software of the electronic circuit board, which manages
the application of the forces and the continuity of movement in the different configurations.
The electronic board is a microprocessor type with keys directly on it for regulation of the operating parameters and con-
trol of accessories such as activation radar, safety radar, dial selector, digital switch, keys, etc.
In compliance with the European standard EN 16005, low energy and full energy operating modes.
instructions for installation
TECHNICAL DATA
S200