PROGATE User manual V-2022-09-20
8 |
E N
2 WIRING & INSTALLATION
This Installation & Programming manual provides the basic installation, wiring and programming information required to program the module
PROGATE and connect all third party devices to the module.
Before beginning installation, make sure that you have the necessary components:
1. USB Mini-B type cable for configuration.
2. Cable consisting of at least 4 wires for connecting the controller.
3. Flat-head 2.5 mm screwdriver.
4. External GSM antenna if reception is weak in the area.
5. Activated nano-SIM card (can have turn off PIN code requests).
6. Instruction manual for the automatic gate to which the GSM gate controller is about to be connected.
Order the necessary components separately from your local retailer
2.1
Fastening
Mounting on DIN rail
Fasten the base of the case in the desired place using screws
2.2
Preparation
Screw the GSM antenna
Insert SIM Card
Figure 2 remove the top lid
Figure 3 Remove the PCB board
Figure 4 Fasten DIN rail adapters to the base of the case
Figure 5Fasten the base of the case
