PROGATE User manual V-2022-09-20
33 |
E N
Figure 48 GSM Communication> SMS/ DIAL reporting
1
The SMS/auto DIAL Phone Numbers
The SMS/auto DIAL Phone Numbers
whom SMS messages will be send and calls will be made
should be entered. User number up to 8. User numbers should be entered with international code.
Near the telephone number of each user, check boxes which events will be sent to that user. User
must type mobile number in the international format (it consist of only those digits that overseas
callers must type:
[country code][area code][local number])
Without symbol ‘+’.
E.g. the mobile number of user in United Kingdom is
+44 (0) 113 xxx xxxx, so Correctly entered user number: 44113xxxxxxx
Incorrectly entered user number: 440113xxxxxxx or 0113xxxxxxx
2
SMS Character Set
SMS character set selection.
3
Limit of Dialing
Indicate maximum number of unsuccessful calls
4
Show Object Name
Object name will be displayed in the SMS message
5
Show Zone Number
Zone number will be displayed in the SMS message
6
Show Event Time
Event time will be displayed in the SMS message
7
Show CID Code
Report Contact ID code
8
Zone1- Zone32 Alarm/ Restore
Zone1- Zone32 alarm and restore events reporting is enabled.
9
System Open/ Close (CID 400 group)
System ARM/DISARM/STAY reporting is enabled.
10
System Troubles (CID 300 group)
System trouble reporting is enabled.
11
Sensor1- Sensor32 Alarm/ Restore
Sensor 1
– Sensor32 alarm and restore events reporting is enabled.
12
Test Events (CID 600 group)
Communication test reporting is enabled.
13
Other Events
Other events reporting is enabled.
14
Send SMS to USER
SMS reporting to selected index of telephone number is enabled.
15
1…8
To which from the specified phone numbers will be send SMS messages if the specified event
will occur in the system
16
Auto DIAL to USER
Auto DIAL to selected index of telephone number is enabled.
15
1…8
To which from the specified phone numbers will be dial if the specified event will occur in the
system
Figure 49Explanation of every field in "SMS DIAL Reporting" window
