manualshive.com logo in svg

Topex Voxell LCR, Installation Manual, Page: 10 / 60

Share
Download
Topex Voxell LCR Installation Manual Download Page 10

 

 

 

 

 

 

 

INSTALLATION MANUAL 

 

 

3.1.2 

Inserting the SIM card 

The SIM card must be inserted into the special slot (holder) of Voxell LCR. 

 

The slot of SIM card is located on top right side, under the status 

LED`s. 
For inserting or extracting the SIM card use the mobile holder for 
SIM.  
Push the little yellow button for activating the holder.  
Handle with care the inserting or extracting the SIM card. 

!

 

When inserting or change the SIM card Voxell LCRimust be 

powered off.  

 

  

 
For inserting the SIM card follow the next steps: 

 

 
1. Push the little yellow button for taking off the SIM carrier. 

 

Note: Because its small dimensions, you can push the button using 
an object that has hard edge, such as a screwdriver. 

 
Note! Because it’s reduced dimensions, the button can be pushed 
with sticking object (keys, pencil, screwdriver, etc)! 

 

 

 

2. Pull out the black holder (the support for SIM)! 
 

 

 

page 10 / 60 

Summary of Contents for Voxell LCR





























































Reviews:

No comments