Topcon System 350, Operator'S Manual

Page: 17 / 112

X30 Spreader Controller
0-14
The operator must disengage assisted steering and use manual
control if an obstacle is in the line of travel or moves into the line
of travel, or if the vehicle steers away from the desired wayline.
To disengage assisted steering:
 Turn the steering wheel a few degrees OR
 Select the Disengage Auto Steering button on the console
AND/OR
 Move the steering switch to the OFF position if the above
actions do not disengage assisted steering.
Vehicle Shut Down Safety
Before leaving the vehicle, disengage assisted steering, turn the
steering switch to the OFF position, and remove the key from the
key switch.
Using a Reference (Base) Station
WARNING: Do not move a reference station
while in operation. Moving an operating reference
station can interfere with the controlled steering of
a system using the reference station. This could
result in personal injury or damage to property.
Operators and other affected personnel must be advised of the
following safety precautions.
 Do not erect the reference station under or within the vicinity
of high voltage power lines.
 When using the portable reference station, make sure that the
tripod is securely mounted.