- 44 -
3.5 Single or Auto Run
Set the measurement method.
The two measurement methods available are single measurement and auto run (continuous
measurement).
Measurement Method
Single
Measurement
After the [MEAS./HOLD] switch is pressed, one measurement is made and
the SR-LEDW/SR-UL2/SR-UL1R/SR-3AR stops.
Auto Run
Once the [MEAS./HOLD] switch is pressed, measurements are made
continuously until the switch is pressed again.
The procedure for setting the measurement method is as follows:
1
Switch to the function mode to display [MEASURE]
[Single or Auto].
☞
'3.1.2 Entering/Returning from the Function Mode'
＊Ｓｉｎｇｌｅ
ｏｒ
Ａｕｔｏ
Ｒｕｎ＊
＊Ｓｉｎｇｌｅ
2
Press the [CHANGE] switch.
3
Press the [ROTATION] switch to change to a measurement method to be set.
Each time the [ROTATION] switch is pressed, the display is changed as follows.
Single
→ Auto Run
4
Press the [ENTER] switch to accept the displayed value.
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
