- 29 -
⑤
Integ Delay Time
: Set the integral delay time.
This menu is indicated when set the Integ Delay ON/OFF to ON
(refer to
④
Integ Delay ON/OFF).
☞
‘3.4.1 Delay Time Setting’
⑥
Single or Auto Run
: Set the measurement method.
☞
‘3.5 Single or Auto Run’
⑦
AverageMeasON/OFF : Set whether to use average measurement function or not.
☞
‘3.14 Measurement Averaging’
⑧
Average time
: Set the measuring times.
This menu is indicated when set the AverageMeasON/OFF to ON.
(refer to
⑦
AverageMeasON/OFF)
☞
‘3.14.1 Averaging Count’
⑨
Measurment speed : Set the Measuring speed.
☞
‘3.6 Measuring Speed’
⑩
High Speed Cal. : Perform the calibration before conducting measurement in High
Speed mode.
☞
‘3.6.1 High Speed Calibration’
⑪
FIX FREQ Setting :Set the frequency value and inner-filter type in the FIX FREQ mode.
☞
‘3.3.4 FIX FREQ Mode’
(2) FACTOR: For the correction factor
①
Factor ON/OFF
: Set whether to use a correction factor or not.
☞
‘3.11 Using a Correction Factor’
②
X Y Z factor
: Set the a correction factor for tristimulus values X, Y, Z.
This menu is indicated when set the Factor (XYZ) to ON.
☞
‘3.12 Displaying and Changing the Correction Factor’
③
CIE Type Select
: Set the CIE Color Matching Function. (Visual field)
☞
‘3.13 CIE Color Matching Function (Visual field)’
④
Color Match Type
: Set the CIE Color Matching Function. (Type)
☞
‘3.14 CIE Color Matching Function (Type)’
⑤
Direct-Conn Factor
: Perform the Direct Correction function for reducing
instrumental
error between a plurality of instruments.
☞
‘2.5.5 Reducing instrumental error between a plurality of instruments’
