- 32 -
3.1.3 Setting Values
In the function mode, it is necessary to input a numerical value for the item.
The procedure for inputting a numerical value is the same for all the items.
Setting of integral time will be explained here as an example.
1
Set to the function mode.
Select the [MEASURE] as one of function mode, and press [ENTER] switch.
And then the display appears as follows.
☞
'3.1.2 Entering/Returning from the Function Mode'
＊
Ｍｅａｓｕｒｅ
Ｔｙｐｅ
＊
＊ＡＵＴＯ
2
Press the [CHANGE] switch. The cursor will be lit in the input stand-by status.
＊
Ｍｅａｓｕｒｅ
Ｔｙｐｅ
＊
＊ＡＵＴＯ
3
Press the [ROTATION] switch to set the measurement mode to [MANU] mode. Each time
the [ENTER] switch is pressed, the measurement modes to be supported are displayed in
order.
☞
'3.3 Measurement Mode'
AUTO
→FREQ→MANU→SYNC→FIX INTEG→FIX FREQ
4
Press the [ROTATION] switch once again, the display appears as follows.
＊
Ｉｎｔｅｇ
Ｔｉｍｅ
Ｉｎｐｕｔ
＊
Ｉｎｔｅｇ
[
ｍｓ
]
＝
１０００
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
DIF.
ABS.
UP
LAMP
DOWN
MEAS.
HOLD
FIELD
FUNCTION
ENTER
CHANGE
ROTATION
SHIFT
①
②
