The menu pops up when you tap roughly in the middle of the
main screen
. There are two pages. Use the
button to cycle
through the pages. You select an icon by tapping it. Until you take your stylus or finger off the screen, icons and buttons are
only highlighted, not yet selected. When a menu option is not available, the icon is dimmed and cannot be selected.
The "change preferences" option gives access to several menu pages with preference options, which are explained in
chapter
4
.
option
function
Navigate to...
Calculates a route from your current position to a certain destination. The destination can be any
type of location except your current position. Enter the destination using the
picking locations
menu
.
The calculated route is shown in the
route summary screen
, from which you can start navigating.
Note
:
To calculate the route TomTom Navigator must have a valid GPS signal. If you do not have this,
the
route summary screen
is shown with the message "Waiting for a valid GPS signal..." The route
will be calculated when the signal becomes available. If necessary, refer to your installation poster
to find out how to connect your GPS device.
Related topic
:
To learn more about the options to set a destination, see the
"Picking locations " description
.
Find alternative
If you are not happy with the route TomTom Navigator has calculated you can recalculate a new
route. For detailed instructions see
Chapter 3.2
.
The recalculated route is shown in the
route summary screen
, from which you can start navigating.
Note
:
Find alternative is not available when you have no route calculated.
Clear route
The calculated route will be removed. The screen will show your position on the map without
providing route instructions or indicators.
Note
:
Clear route is not available when you have no route calculated.
Add favourite
Add a location to your list of favourites. You can do this using any type of location except another
favourite. Enter the location using the
picking locations menu
.
Related topic
:
To learn more about the options to set a destination, see the
"Picking locations " description
.
Change preferences
TomTom Navigator has many preferences which set the behaviour to your personal liking.
Chapter 4
describes all the options from the preference menu in detail.
Plan from A to B
To plan a route without a valid GPS signal. You can manually select the departure and destination
of your route.
Chapter 3.1
describes this function in detail.