4.18. Set schematic speed
4.19. Change voice
4.20. Switch Language
4.21. POI appendix
5. Installation
5.1. Using the CD-ROM
5.2. Requirements for installation
5.3. First time installation of TomTom Navigator with a map
5.4. (Re-)Installing TomTom Navigator, voices and maps
5.5. Major Roads Map
1. What you see on the screen
1.1. The main screen
The main screen of TomTom Navigator is used to navigate to your destination. Your position is displayed on the map using
your GPS receiver. If your GPS receiver is switched off, or has not (yet) determined a clear position from the GPS satellites, the
main screen displays your last known position. To emphasize the fact that your
actual
position is unknown, the screen is
displayed in black and white.
"Sound off" warning indicator
Next instruction
The name of the next street
Journey information
Speed/distance indicator
Your current GPS position
"Zoom in" button
"Next highway" indicator
"Zoom out" button
The dark red path indicates the calculated route. The route instructions will guide you along this path to reach your destination.
Your next driving instruction
shows an arrow for the direction to follow and a distance indicator (presented in your
distance
units preference
) when to do it. The bottom of the screen
shows the street name you will reach if you follow the current
driving instruction. If the "sound off" indicator
is not shown, the displayed instruction will be accompanied by voice
instructions. If necessary, use the
sound on preference
to switch on the voice instructions.
To increase or decrease the scale of the map, tap
to zoom in or
to zoom out relative to your current position. This keeps
working when covered by the
"next highway" indicator.
The journey information
shows the current time, estimated time of arrival and the time left to reach your destination.
