13
4 O p e r a t i O n
4.3.2 Operating displays on routes in Austria
On toll roads in Austria, toll collection with the On-Board Unit is per-
formed with acoustic signals only. The acoustic signals cannot be
switched off. The LEDs and displays of the On-Board Unit do not
provide any toll collection information on these routes.
The On-Board Unit emits an acoustic signal following successful toll
payment when a toll gantry is passed. If the On-Board Unit is disa-
bled, four acoustic signals are output in succession. If no acoustic
signal sounds when passing a toll gantry in Austria, toll collection
has probably not taken place. You must pay the outstanding toll
retroactively at a GO distribution outlet. In the event of permanent
On-Board Unit failure, a GO-Box can be obtained at any time from
the GO distribution outlet.
Austria service area – with AT service activated
You are in the Austria service area and have registered your Toll
Collect On-Board Unit for Austrian toll collection.
①
Most recent setting for number of axles
②
Country code/country designation for Austria
③
LED is green (no meaning)
Austria service area – without optional AT service
You are in the Austria service area, but have not registered your
Toll Collect On-Board Unit for Austrian toll collection.
①
Most recent setting for number of axles
②
Toll collection with the On-Board Unit does not take place
③
LED is green (no meaning)
Green
3 axles
❷
❸
❶
Green
3 axles
no service
❷
❸
❶
