Service Maintenance
Servicing and maintenance of the fire pump must be
carried out by o n l y t h e persons who have professional
knowledge, who are familiar with the device, and who
understand laws and regulations regarding safety and
accident prevention.
Before starting maintenance work, turn the main switch
off to stop the engine.
Disconnect the negative terminal of the battery.
Before starting maintenance work, securely place the
portable fire pump on the ground.
In the case of just after stopping the engine, do not touch the
exhaust pipe, the muffler and the other engine parts until
these parts will be cold enough. These parts could be very
hot and will cause severe burns.
Electrical equipment
Only expert electricians or trained staff
members should handle electrical equipment.
When removing the battery cable, always
disconnect the negative (-) cable first from the
battery.
When installing the battery cable, be sure to
connect the positive (+) cable first before
connecting the negative (-).
Do not place any metal on the top of or around
the battery. Doing so may cause a short circuit.
Use a fuse with the same specifications as the
original one when replacing it. Using a fuse that
has a greater capacity than the rated value may
damage the equipment.
Check the electrical equipment of the fire pump
on a regular basis.
