23
PREPARATION FOR OPERATION
Oil level sensor
The lamp on the operation panel will light when the level of engine oil in the
tank has decreased approximate to 1/3 (0.5 L) of the tank. And also the
warning buzzer will sound. In this case, add 2-stroke engine oil
immediately.
Governor oil
Before using a fire pump, check the governor oil
level with the oil dipstick. To check oil level,
remove the dipstick and check the oil level. The
oil level should be between upper and lower limit
line on the dipstick. Add 2-stroke engine oil
through the governor oil filler port if the oil level is
lower than the lower limit line.
Drain valve
Make sure all the drain valves are closed.
Discharge valve
Make sure the discharge valves are closed.
Overheat protection sensor
This device shuts down the engine automatically when the engine has
excessively overheated caused by lack of cooling water.
6
Close
Governor oil filler port
Dipstick
Upper
Lower
CLOSE
OPEN
