29
STARTING THE ENGINE
Pump Installation
･
Set the pump on a level ground at
least
three
meters
away
from
inflammable materials including dead
leaves
and wood. Because
the
temperature
around
the
engine
becomes high with the muffler
and
exhaust gas.
･
Exhaust gas, which contains carbon
monoxide, is deadly poisonous gas
with no color and no smell.
･
Do not operate the engine in a closed
space or an insufficient ventilation
place such as indoor, in the vehicle,
warehouse, tunnel, well, in the hold of a
ship.
･
Do not start the engine with discharge
valve opened.
･
Do not pump up and discharge liquids
other than water. (e.g. flammable liquids
or chemicals)
･
The pump is only designed to pump up water.
･
Do not discharge water to water-prohibiting substance.
･
Do not run the pump without suction port strainer.
･
Inserting your hand into the suction port, you may be
seriously injured by the rotating inducer.
･
Do not run the pump without suction port strainer.
･
If gravel enter the pump, then the pump could be
damaged and the performance would be significantly
reduced.
1. Place the pump near the water source on a flat area.
2. Connect a suction hose and a delivery hose to the pump securely. Put
one end of suction hose into water source. The suction hose must have
a strainer, and also must have a basket at the tip.
3.
Recommend the nozzle diameter for discharging water are shown below.
Largest Nozzle Dia. (mm) *
Twin outlet
discharging(
branch pipe)
Single outlet discharging
25
36
Remark: * The largest nozzle dia. at 3 m of suction head.
8
CAUTION
