44
MAINTENANCE AFTER OPERATION
Battery charger
First, read the instruction manual of the battery charger.
･
Use an automatic battery charger.
･
Use a maintenance-free (MF) battery.
･
The battery capacity must be 12 V-16 Ah/5h
(12V-18Ah/10h) and below.
･
Use the battery charger that has an overcharge
prevention function.
･
Disconnect the battery charger after charging is
completed.
2. When charging the battery, turn off the power pressing the stop switch “ ”.
･
Do not connect a cigarette lighter to the battery charger
socket. Doing so may melt or burn out the socket due to
overheating.
･
If the pump power is on, the battery cannot be charged
because the charging circuit is turned OFF.
3. When pressing the main switch “ ”, check that the
insufficient battery
charge
warning lamp goes out after alert action check.
･
If the battery is not enough charged to turn on the lamps
on the control panel, charge the battery first or replace it
with a battery which is charged fully before starting the
engine.
･
If the battery voltage is too low, "Lamp check" does not be
done even if pressing the start switch. The alarm lamps of
the control panel do not light on and the alarm does not
sound.
11
CAUTION
NOTE
NOTE
