WWW.TMGINDUSTRIAL.COM
13 / 27
dŽůů&ƌĞĞ
:1-887-761-2819
O P E R A T I O N
6. Check the condition of the curtain in the feed hopper. It must be in good condition to prevent chips from flying
out.
MACHINE SET
!
UP
Follow this procedure to prepare and setup the machine at the work site:
1. Use the skid steer to position the Wood Chipper at the work site.
IMPORTANT
Position the machine so the prevailing wind/breeze blows the
exhaust gases/fumes away from the operator's station.
2. Lower the feed hopper down into its working configuration:
a. remove the nuts on the hopper anchor bolts,
b. unpin and the feeder hopper latch
c. carefully lower the hopper and secure it with the with the nuts on the anchor bolts.
d. Secure the feed hopper latch to the discharge chute with the latch pin
