WWW.TMGINDUSTRIAL.COM
9 / 27
dŽůů&ƌĞĞ
:1-887-761-2819
I M P O R T A N S A F E T Y I N F O R M A T I O N
Storage Safety
1. Store the unit in an area away from human activity.
2. Do not children to play on or around the stored machine.
3. Store the unit in a dry, level area. Support the frame with planks if required.
Transport Safety
1. Comply with state and local laws governing safety and transporting of machinery on public roads.
2. Check that all the lights, reflectors and other lighting requirements are installed and in good working
condition.
3. Do not exceed a safe travel speed. Slow down for rough terrain and cornering.
4. Fold up and secure feed hopper before moving or transporting.
5. Be sure the chipper is attached positively to the skid steer with the lock pins fully engaged.
6. Do not drink and drive.
7. Be a safe and courteous driver. Always yield to oncoming traffic in all situations, including narrow bridges,
intersections, etc. Watch for traffic when operating near or crossing roadways.
8. Never allow riders on the machine.
Operation Safety
•
Read and understand operator's manual before starting. Review safety instructions annually.
•
Turn machine off, stop engine, remove ignition key and place in your pocket, set park brake and wait for all
moving parts to stop before servicing, adjusting, repairing, or unplugging.
•
Keep the working area clean and free of debris to prevent tripping. Operate only on level ground.
•
Close and secure rotor cover before operating.
•
Close and secure all guards, deflectors, and shields before starting and operating.
•
Keep hydraulic lines and fittings tight, in good condition and free of leaks.
•
Do not point discharge at people, animals, or buildings. Rotor can expel wood chips fast enough to cause
injury.
•
Do not allow children, animals, or unauthorized people into the working area.
