WWW.TMGINDUSTRIAL.COM
7 / 27
dŽůů&ƌĞĞ
:1-887-761-2819
I M P O R T A N S A F E T Y I N F O R M A T I O N
Operating Safety
1. Please remember it is important that you read and heed the safety signs on the Skid Steer Mounted Wood
Chipper. Clean or replace all safety signs if they cannot be clearly read and understood. They are there for
your safety, as well as the safety of others. The safe use of this machine is strictly up to you, the operator.
2. All things with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded
operator who recognizes potential hazards and follows reasonable safety practices. The manufacturer has
designed this Skid Steer Mounted Wood Chipper to be used with all its safety equipment properly attached,
to minimize the chance of accidents. Study this manual to make sure you have all safety equipment
attached.
3. Close and secure rotor cover before operating.
4. Close and secure all guards, deflectors and shields before starting and operating.
5. Read and understand operator's manual before starting. Review safety instructions annually.
6. Personal protection equipment including hearing protection, hard hat, safety glasses, safety shoes, and
gloves are recommended during assembly, installation, operation, adjustment, maintaining, repairing,
removal, or moving. Do not allow long hair, loose-fitting clothing, or jewelry to be around moving parts.
7. Keep hydraulic lines and fittings tight, in good condition and free of leaks.
8. Never place any part of your body where it would be in danger if movement should occur during assembly,
installation, operation, maintenance, repairing, unplugging, or moving.
9. Turn machine off, stop engine, remove ignition key and place in your pocket, set park brake and wait for all
moving parts to stop before servicing, adjusting, repairing or unplugging.
10. Do not run machine inside a closed building to prevent asphyxiation from engine exhaust.
11. Use care when feeding material into chipper. Do not send metal, bottles, cans, rocks, glass or other foreign
material into wood chipper. If foreign material enters chipper, stop machine, turn engine off and place ignition
key in your pocket and wait for all moving parts to stop before removing material and/or unplugging. Inspect
machine for damaged or loose parts before resuming work.
12. Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating this
equipment. Consult your doctor about operating this machine while taking prescription medications.
13. Do not allow riders on this machine at any time. There is no safe place for any riders.
