WWW.TMGINDUSTRIAL.COM
12 / 27
dŽůů&ƌĞĞ
:1-887-761-2819
O P E R A T I O N
Machine Break-In
Although there are no operational restrictions on the Wood Chipper when used for the first time, it is
recommended that the following mechanical items be checked:
A. After operating for 1 hour:
1. Torque all fasteners and hardware.
2. Check condition of rotor bearings.
3. Check the condition and clearance of the twig-breaker, rotor and stationary blades. Adjust or replace
as required.
4. Check for entangled material. Remove all entangled material before resuming work.
5. Lubricate all grease fittings.
B. After operating for 10 hours:
1. Repeat steps 1 through 5 listed above. (Section A)
2. Go to the normal servicing and maintenance schedule as defined in the Maintenance Section.
Pre-Operation Checklist
Efficient and safe operation of the TMG Skid Steer Mounted Wood Chipper requires that each operator reads
and understands the using procedures and all related safety precautions outlined in this section. A pre-
operation checklist is provided for the operator. It is important for both the personal safety and maintaining
good mechanical condition that this checklist is followed.
Before operating the Wood Chipper and each time thereafter, the following areas should be checked off:
1. Lubricate the machine per the schedule outline in the Maintenance Section.
2. Check the rotor, blades, and twig-breaker. Remove any twine, wire or other material that has become
entangled.
3. Check the condition and clearance of the twig- breaker, rotor, and stationary blades. Adjust or replace as
required.
4. Check that all bearings turn freely. Replace any that are rough or seized.
5. Make sure that all guards and shields are in place, secured and functioning as designed.
