NanoCam3D Mk.1 Instruction Manual
IMPORTANT – READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Press push button 2 and keep it pressed for ca. 1 sec until the status LED flashes fast, then
release push button 1.
The camera now is in online AE algorithm selection mode and displays the currently active
algorithm with a slow LED flashing cycle (Average brightness tracking = repeated single
flash, Weighted Average Brightness = repeated double flash, Adaptive Weighted AE for
highlights = repeated triple flash, Adaptive Weighted AE for lowlights = repeated quadruple
flash).
Select one of the four AE algorithms by pressing and releasing either push button 1 (counts
up) or push button 2 (counts down). The selected algorithm is indicated by the
corresponding flashing sequence of the LED.
Activate desired AE algorithm by pressing push button 2 again and keep it pressed for ca. 1
sec until the status LED indicates a solid signal, then release push button 1. This will
terminate the AE algorithm selection mode. The algorithm settings will be saved and the
camera restarts with the new settings.
3 Warranty
This product is covered by the German statutory warranty. The warranty is fulfilled at the seller's
option by repair, replacement or withdrawal of the purchase contract.
The warranty becomes void when the malfunction was or is caused by third party, or by improper
installation, or commissioning or modification, by incorrect or negligent handling, or improper
transport, or excessive stress, by unsuitable operating resources, by inadequate video
transmission systems, by improper use or operation of the product.
Please note that the technical realization of the wireless video transmission from the camera to the
end user's video receiver, or video goggle, or head-mounted display has a significant impact on the
video quality. Inappropriate video quality caused by the use of unsuitable video transmission
systems is therefore not an error or malfunction of the product.
4 Disposal and Environmental Protection
Electrical and Electronic Equipment (EEE) can be recycled when no longer needed and
must not be disposed together with usual household waste. Therefore we kindly ask you
to support us with your active contribution to the conservation of resources and the
protection of the environment by disposing this device at the official EEE collection points.
5 Manufacturer Information and Technical Support
This camera was developed for you by:
TMG - Ingenieurbüro UG (haftungsbeschränkt)
Sales tax ID: DE294861035
Römerstr. 14
WEEE ID: DE55557702
89077 Ulm
Website:
www.themissinggear.eu
GERMANY
Contact:
Page 9 of 12
Subject to change without notice.
EN
