NanoCam3D Mk.1 Instruction Manual
IMPORTANT – READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
TMG - Ingenieurbüro UG (haftungsbeschränkt), the “Manufacturer”, is disclosing this Document
and Intellectual Property (hereinafter “the Product”) to you for the intended use as a FPV camera
for radio controlled model aircraft. The Manufacturer expressly disclaims any liability arising out of
the application or use of the Product. The Manufacturer reserves the right to make changes, at any
time, to the Product as deemed desirable in the sole discretion of the Manufacturer. The
Manufacturer assumes no obligation to correct any errors contained herein or to advise you of any
correction if such be made. The Manufacturer will not assume any liability for the accuracy or
correctness of any engineering or technical support or assistance provided to you in connection
with the Product.
THE PRODUCT IS PROVIDED “AS IS” WITH ALL FAULTS, AND THE ENTIRE RISK AS TO ITS
FUNCTION AND IMPLEMENTATION IS WITH YOU. YOU ACKNOWLEDGE AND AGREE THAT
YOU HAVE NOT RELIED ON ANY ORAL OR WRITTEN INFORMATION OR ADVICE, WHETHER
GIVEN BY THE MANUFACTURER, OR ITS AGENTS OR EMPLOYEES. THE MANUFACTURER
MAKES NO OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY,
REGARDING THE PRODUCT, INCLUDING ANY WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT OF THIRD-
PARTY RIGHTS. IN NO EVENT WILL THE MANUFACTURER BE LIABLE FOR ANY
CONSEQUENTIAL, INDIRECT, EXEMPLARY, SPECIAL, OR INCIDENTAL DAMAGES,
INCLUDING ANY LOST DATA AND LOST PROFITS, ARISING FROM OR RELATING TO YOUR
USE OF THE PRODUCT, EVEN IF YOU HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE TOTAL CUMULATIVE LIABILITY OF THE MANUFACTURER IN CONNECTION
WITH YOUR USE OF THE PRODUCT, WHETHER IN CONTRACT OR TORT OR OTHERWISE,
WILL IN NO EVENT EXCEED THE AMOUNT OF FEES PAID BY YOU TO THE MANUFACTURER
HEREUNDER FOR USE OF THE PRODUCT. YOU ACKNOWLEDGE THAT THE FEES, IF ANY,
REFLECT THE ALLOCATION OF RISK SET FORTH IN THIS AGREEMENT AND THAT THE
MANUFACTURER WOULD NOT MAKE AVAILABLE THE PRODUCT TO YOU WITHOUT THESE
LIMITATIONS OF LIABILITY.
Notice: Some jurisdictions do not allow the exclusion or limitation of liability as outlined above, so
the above limitation or exclusion may not apply to you.
The Product is not designed or intended for use in the development of on-line control equipment in
hazardous environments requiring fail-safe controls, such as in the operation of nuclear facilities,
aircraft navigation or communications systems, air traffic control, life support, or weapons systems
(“High-Risk Applications”). The Manufacturer specifically disclaims any express or implied
warranties of fitness for such High-Risk Applications. You represent that use of the Product in such
High-Risk Applications is fully at your risk.
© 2017 TMG - Ingenieurbüro UG (haftungsbeschränkt). All rights reserved.
cinemizer is a registered trademark of Carl Zeiss. Molex and PicoBlade are registered trademarks
of Molex, LLC. All other trademarks listed herein are the property of their respective owners.
NanoCam3DMk1 Manual EN V1.0
Page 2 of 12
Subject to change without notice.
EN
