172-65639M-01 (EF200) 13 Apr 2018
45
Locking status
The write protection types that are currently active can be
determined.
Options
Description
None
The access status displayed in “Access status
display” parameter applies.
Hardware
locked
The DIP switch for hardware locking is activated on
the main electronics module. This prevents write
access to the parameters.
Temporarily
locked
Due to internal processing in the device (e.g. up-
/downloading of data, reset), write access to the
parameters is blocked for a short time. Once the
internal processing has been completed, the
parameters can be changed once again.
8.2.3 Display: Operation
→
Display
NOTE: See 8.2.8 for advanced display settings.
Descriptions of functions: Display
Format display
Select how measured values are shown on the display.
• 1 value, max. size
• 1 ba 1 value
• 2 values
• 1 value large + 2 values
• 4 values
Factory setting: 2 values
Contrast display
Set the display contrast.
The contrasts increases as the value increases.
Setting range
：
20 to 80%
Factory setting: 25%
Display interval
Set time measured values are shown on display if display
alternates between values.
Setting range
：
1 to 10 seconds
Factory setting: 5 seconds
8.2.4 Totalizer handling: Operation
→
Totalizer handling
NOTE: See 8.2.16 for advanced totalizer settings.
Descriptions of functions: Totalizer handling
Control Totalizer
1 to 3
Control totalizer value.
• Totalize
• Reset + hold
• hold
• Reset + totalize
• totalize
Factory setting: Totalize
Preset value 1 to 3
Specify start value for totalizer. (Signed floating-point number)
Factory setting: 0 m
3
Reset all totalizers
Reset all totalizers to 0 and start.
• Cancel
• Reset + totalize
Factory setting: Cancel
