172-65639M-01 (EF200) 13 Apr 2018
50
Descriptions of functions: Pulse/frequency/switch output
Switch output
function
NOTE: This function is available when the operating mode is
set to “switch output”.
Select function for switch output.
• Off
• On
• Diagnostic behavior
• Limit
• Status
Factory setting: Off
Assign diagnostic
behavior
NOTE: This function is available when the operating mode is
set to “switch output”.
Select diagnostic behavior for switch output.
•
Alarm
•
Alarm or warning
•
Warning
Factory setting: Alarm
Assign limit
NOTE: This function is available when the operating mode is
set to “switch output”.
Select process variable for limit function.
• Volume flow
• Corrected volume flow
• Mass flow
• Flow velocity
• Temperature
• Calculated saturated steam pressure
• Steam quality (Steam dryness)
• Total mass flow
• Energy flow
• Heat flow difference
• Reynolds number
• Totalizer 1
• Totalizer 2
• Totalizer 3
Factory setting: Volume flow
Assign flow
direction check
NOTE: This function is available when the operating mode is
set to “switch output”.
Select process variable for flow direction monitoring.
• Off
• Volume flow
• Mass flow
• Corrected volume flow
Factory setting: Volume flow
Assign status
NOTE: This function is available when the operating mode is
set to “switch output”.
Select device status for switch output.
• Low flow cut off
Factory setting: Low flow cut off
Select units for assigned
process variable
Select units for the process variable assigned to switch output.
NOTE: See 8.2.11 for details.
Switch-on value
NOTE: This function is available when the operating mode is
set to “switch output”.
Enter measured value for the switch-on point. (Signed floating-
point number)
Factory setting: Depends on customer specifications.
Switch-off value
NOTE: This function is available when the operating mode is
set to “switch output”.
Enter measured value for the switch-off point. (Signed
floating-point number)
Factory setting: Depends on customer specifications.
