172-65639M-01 (EF200) 13 Apr 2018
16
3.6 Transmitter Housing / Display (Mounting/Rotating)
Rotating the Transmitter Housing
The transmitter housing of EF200 can be rotated on the housing support up
to 350° clockwise or counterclockwise to reposition the optional local display
for easy reading.
This is carried out as follows (see Fig. 11):
1. Loosen the securing screw (minimum one turn).
2. Turn the transmitter housing to the desired position.
3. Fasten the securing screw firmly.
Rotating the Display
The display module can be rotated for easy reading in any position (see Fig. 12).
1. Loosen the securing clamp of the electronics compartment cover using a
hex key.
2. Unscrew cover of the electronics compartment from the transmitter
housing.
3. Optional: pull out the display module with a gentle rotational movement.
4. Rotate the display module into the desired position: Max. 8 × 45° in each
direction.
5. Without display module pulled out:
Allow display module to engage at desired position.
6. With display module pulled out:
Feed the cable into the gap between the housing and main electronics
module and plug the display module into the electronics compartment until
it engages.
7. Reverse the removal procedure to reassemble the transmitter.
Figure 12
Rotating the local display
Figure 11
Rotating the transmitter
housing
