TLS TLS430FDCEx1 Series, Installation, Operation & Service Parts Manual

Page: 7 / 43

7
GENERAL REQUIREMENTS and LIFT SPECIFICATIONS
Max. Capacity 30,000 lb.
(13,636 kg)
- 15,000 lbs.
(6,818 kg)
each Runway
MODEL TLS430FDCRx1 TLS430FDCXx1 TLS430FDCEx1
Min. Wheelbase @ Rated Capacity 230’’ 230’’ 230’’
Min. Wheelbase @ 75% Capacity 195’’ 195’’ 195’’
Min. Wheelbase @ 50% Capacity 165’’ 165’’ 165’’
Min. Wheelbase @ 25% Capacity 130’’ 130’’ 130’’
Ongoing design modifications and quality improvements may change specifications listed in this manual without notice
Lift should only be installed on level concrete floors with no more than 3
º
of slope and
a minimum of 4 inches
(102mm
) and 3000 psi
(20.7MPa)
concrete that has been aged a
minimum of 30 days. A qualified person should be consulted to address seismic loads
and other local or state requirements. Do not install the lift on asphalt or outdoors.
A constant supply of 230 volt – 1 phase – 60 Hz – 30 amp electrical power is required
for this lift.