TLS TLS430FDCEx1 Series, Installation, Operation & Service Parts Manual

Page: 15 / 43

15
To Raise the Lift

Push up button to raise the lift by about 10’’.

Check for the vehicle movement and weight distribution. Raise to desired height if secure.

Press "DOWN" handle to lower lift on to the mechanical safeties. Make sure all safety locks
sit on the same position of the safety ladders.

DO NOT WORK UNDER A LIFT THAT IS NOT IN THE LOCK POSITION.
To Lower the Lift

Inspect the lifting area to insure all personnel and debris have been cleared away.

Raise the lift slightly and then disengage all safety locks by pulling the safety release
handle.

Press the lowering lever on the power unit to begin lowering. Safety locks must be all
disengaged during the lowering.

Lower lift completely to the floor and carefully drive off the vehicle from the lift runways.