TLS TLS430FDCEx1 Series, Installation, Operation & Service Parts Manual

Page: 13 / 43

13
Insure this manual along with all operation, inspection and
maintenance instructions are delivered to the owner, user
and employer.
LIFT OPERATION: Before lifting a vehicle, insure all operators are qualified,
have been trained and are following all safety instructions. Read and follow the
ALI "Lifting It Right" manual
included with the lift
. Always use the "Vehicle Lifting
Points" reference guide when lifting a vehicle
.
Insure all materials stay up to date
» » www.autolift.org/
(see example of SAE J2184 standard below)
Insure that every vehicle will be securely positioned on the lift (use wheel chocks). When
using air/hydraulic rolling jacks, always use vehicle manufacturer's recommended lifting
points.
Never allow anyone under the lift when raising or lowering. Always insure
mechanical safety locks are completely engaged on all four columns before
proceeding under the lift or a vehicle.
Lift Operation: Controls on the powerpack and powerpack column perform the following
functions:
- “PUSH BUTTON”: Raise the lift to the desired height by pressing the push button on the
power unit
- "AIR LOCK RELEASE BUTTON": retracts or releases safety locks at all four columns. This
button (along with the "DOWN HANDLE") must be pressed and held during the entire
lowering procedure.
- "DOWN HANDLE": on powerpack pump manifold lowers the lift. Note: Before lowering the
lift you should raise it slightly to remove pressure from safety locks allowing them to
disengage completely.