TKH
TKH Security | Siqura EX PTZ Series |
Installation manual v4
6-66
Before you continue
Prior to installation and operation, carefully read all instructions in this manual and heed
all warnings.
Unpack this equipment and handle it carefully. If the package appears to be damaged,
notify the shipper immediately.
Use the original packaging to transport the unit. Disconnect power supply before moving
it. In case of returning the equipment, the original packaging must be used.
Any change performed on the unit that is not previously approved by the manufacturer
will void both the certification and the warranty.
Trying to manually force the wiper will result in damaging the device and will void the
warranty.
Fasteners used for the assembly shall be M5-08x12 grade A4-70. -Tightening/loosening
screws using automatic tools (such as drill drivers) may result in damaged threads.
After the installation of the unit, the desiccant bag must be placed inside the Pan & Tilt
unit, assuring it won't be damaged by rotating and moving parts.
All the electrical connections should be realized in a non-explosive atmosphere.
Before performing any operation, turn off the power. The installation of the unit can be
performed only by qualified personnel in accordance with the relevant code of practice
(e.g., EN60079-14) and with all the relevant local and national standards including but
not limited to the use of special pipes, tapes, sealants, cables and glands.
For security reasons, do not install the unit in the proximity of water containers and
never push objects or pour liquids into the unit. The unit can be safely used in damp
environments or outdoors, as long as the glands are properly sealed.
When leaving the unit unused for long periods, disconnect supply cables.
The internal transformer of the unit should never be used to power external devices.
Connecting GND/Earth/PE to line or neutral will result in damaging the device and will
void the warranty.
No ventilation is needed for the unit, as it is completely sealed.
When a optical fiber cable is used on the equipment it shall be suitably protected
against mechanical damage external to the equipment (wire armored cable, fitted in
conduit, within a cable tray, etc.).
The camera must be installed so that the risk of impact with the glass window is low.
