TKH Security Proposal | RFP Name | RFP Number
TKH Security | Siqura EX PTZ Series |
Installation manual v4
18-66
Clean the unit
The layer of filth upon the unit should never exceed 5 mm thickness. Use a dry or
damp cloth. Do not use compressed air to clean the unit.
Check electrical connections
Check cables and electrical connections for integrity and tightness. If the cables
seem worn or damaged, refer to the Extraordinary maintenance section.
Check mounting accessories
Check mounting bolts and screws for integrity and tightness. Replace or tighten any
damaged/loose mounting hardware.
Extraordinary maintenance
Any intervention which is not listed in the Routine activities list must be done in absence of
potentially explosive atmosphere. Any repair or part replacement must be done by, or
under supervision of TKH Security. Use only original spare parts. The manufacturer
declines all liability for any damage resulting from tampering, use of non-original spare
parts and service carried out without following the directives of the present manual.
If the equipment is likely to come into contact with aggressive substances, then it is the
responsibility of the user to take suitable precautions that prevent it from being adversely
affected, thus ensuring that the type of protection is not compromised.
Aggressive substances: acidic liquids or gases that may attack metals, or solvents that
may affect polymeric materials.
Suitable precautions: regular checks as part of routine inspections or establishing from the
material’s datasheet that it is resistant to specific chemicals.