Installation
Aligning and mounting the machine
63
TK Elevator
BA, TW45C | 6231003860 | 06/2022
Fig. 32
ATR_2_21_0049_0
1
2
Fig. 33
ATR_2_21_0050_0
Item Designation
Item Designation
1
Left-hand version
2
Right-hand version
6.2
Aligning and mounting the machine
NOTICE
One-sided load on component and or drive set up on a slant!
Failure of the drive involving damage.
The drive must be horizontal.
Use a spirit level to check; add support if necessary.
Secure the drive on the machine base frame against shifting with ad-
justing screws or stops.
Arrange the suspension ropes symmetrically on the suspension plate,
traction sheave and rope pulleys.
1. Use lifting gear to place the machine on the base frame; the traction
sheave must be on the diverter pulley side
2. Move the machine sideways on the base frame until the required ASL di-
mension (parallel gap between the ropes at the rope departure) is
reached.
3. Align the rope grooves of the traction sheave and diverter pulley in paral-
lel.
