8
longer than needed.
2
Plug the coils into the sockets at the upper right of the ELEMENT
Elite chassis. They will only go in one way. After pushing them in
as far as they will go, twist them to the right (clockwise) until they
click and latch in place. The silver release tab should now be at
the top of the plug. To disconnect, slide the release tab away from
the chassis and twist a plug to the left (counter clockwise) until it
will pull out.
3
Plug one end of the 12-foot audio cable into your source device,
such as a smart phone, MP3 player, tablet or laptop.
We strongly
recommend using a laptop.
Plug the other end of the audio cable into the ELEMENT Elite
chassis audio input socket. The other front panel audio socket is
for plugging in a set of ear buds if you ever need to confirm the
source signal is getting to the chassis (you will be able to hear the
frequency being sent…you will only hear it in one ear because it is a
monaural system.)
CONNECTION
of your ELEMENT Elite System
1
Plug the power cord into the back of the ELEMENT Elite chassis
and into a wall outlet. If an
outlet is not within reach of
the power cord make sure
any extension cord used is
rated for 15 amps and is not
