![TIVERTON AUDIO ELEMENT Elite Owner'S Manual Download Page 21](http://html1.mh-extra.com/html/tiverton-audio/element-elite/element-elite_owners-manual_1120263021.webp)
21
Therefore, use the full power of the ELEMENT Elite with
discretion and in general, use no more power than your body is
able to handle. The same principle holds true when using PEMF
for general wellness (cell signaling). You wouldn’t take an entire
bottle of a supplement at once thinking, “OK, good for six months”
so don’t think you can do that with PEMF. The metabolic targeting
is somewhere between the other two. Not as aggressive as
antibiotics, not as gentle as multivitamins, and working on a more
specific area of the body.
In general, the higher the intensity is set for a session, the
shorter the duration of the session should be. And, it’s generally
better to use longer session durations (or sessions more often)
with lower intensity than the other way around. Even with that
said, if you are dealing with an issue that is deep in the core of
your body, the intensity needs to be sufficient to create a magnetic
field that will penetrate your body to where the problem resides.
This is in general because, as with other things in life, there is
a limit to how short the session can be to have any benefit. It’s
a bit like needing an antibiotic...you want one that acts quickly,
but you would never think of taking the entire prescription at
once thinking it would work faster...it would instead cause more
problems than what you are taking it for in the first place.
Again in general terms, the higher the frequency, the higher
the intensity needs to be set. When using two frequencies, the
intensity levels will be relative to each other. In other words,
you need to set the intensity level for the higher of the two
frequencies to be greater than the intensity level set for the lower
frequency in order for the two combined frequencies to produce
an approximate equal magnetic field at the coil.
The intensity levels relative to the frequencies are not linear.
A frequency of half the value of another does not need to be set
at half the intensity for equal magnetic field. Rather, a frequency
of half the value would be set at 10% less for equal magnetic field, a
frequency of one quarter the value would be set at 20% less and so on.
You may, on the other hand, choose to run one of the
frequencies at a higher level of magnetic field when you desire
to concentrate on the benefits of that frequency while using a
lower level of the second frequency for getting just a minor boost.
Since all bodies — and the body’s natural reaction to things — are