5
Coil Output connections (twist-lock).
“Signal Type” LED lights whenever there
is a magnetic field present in coils.
Input from iPhone
®
, laptop or MP Player
(
1
/
8
" audio input socket).
Carry handle.
SYSTEM PROTECTION MODE LED LIGHTS:
The “
amplifier protect mode” (left) LED will come on for a few
seconds when you first power up the machine. Otherwise, the red
“
amplifier protect mode” (left) and “system overheat protect mode”
(right) LEDs will
not come on unless those issues occur.
If the amplifier goes into protect mode and the LED comes on
during operation, it will reset back to normal operation within
about 30 seconds.
If the system goes into
system overheat protect mode and
the right LED comes on, it will reset after cooling 15 degrees
Fahrenheit. If this should happen, the coil will most likely be
getting too hot as well.
DO NOT TURN THE POWER OFF DURING
COOL DOWN.
If you do, the system fans will turn off and it will
take much longer to cool.
A GUIDED TOUR of the ELEMENT Elite PEMF system
UNDERSTANDING THE ELEMENT Elite CHASSIS.
As with any sophisticated piece of equipment, it is best to first go
over and understand all of the connections, buttons, and lights on
the front panel so you will know what the machine is doing and
how to use it properly for maximum benefit. Besides…our manual
designer likes to draw arrows.
Ear Bud connection
(
1
/
8
" audio input socket).
“
Protect mode” LED lights; see below for full explanation.
5
buds if you ever need to confirm the source signal in getting to the
chassis (you will be able to hear the frequency being sent).
4
As with any sophisticated piece of equipment, it is best to first go
over and understand all of the connections, buttons, and lights on
the front panel so you will know what the machine is doing and
how to use it properly for maximum benefit. Besides…our design-
er likes to draw arrows, as is evidenced below.
5
Carefully read the
Audio Sources and Software
section beginning
on the next page for source software signal details.
6
Download and familiarize yourself with the software that you
have chosen. As noted above, you can test it by plugging a pair of
ear buds or headphones into the other ELEMENT audio socket.
A Guided Tour of Your ELEMENT PEMF System.
SYSTEM PROTECTION
MODE LED LIGHTS:
The two red LED
"amplifier protect mode"
and "system overheat
protect" LEDs will not
come on unless these
issues occur.
Under normal con-
ditions, these lights
will never come on.
If the amplifier goes
Power
LED
Amplifier "
protection
mode
" LED lights red
when overdriving
caused ELEMENT's
amplifier to go into
protection mode.
System Overheat
LED lights red when
overheating causes
ELEMENT to go into
protection mode.
System Power On LED
shines light blue when
system is on.
On top: Power Switch
Signal input / headphone
output monitor jacks.
Both sockets serve the
both purposes.
Coil Output Connection
(twist - lock)
Carry handle
CHANGE P
IX
