19
Specifications
System Voltage
120v AC
Maximum System Power
2500w
Peak continuous gauss
292*
Chassis Size
10-5/8"W x 8-3/8"H x 15-1/2"D
Chassis Weight
30 lbs.
Coil Size
10.75" x 11.25" oval
Coil Weight
10 lbs.
Coil Cross Section
1.5" x 1.5" square
Coil Lead Length
12ft
Wave Form
any**
Frequency Range
7 -10,000hz***
Amplifier over drive protection
YES
System overheat protection
YES
Thermal circuit breaker protection YES
Onboard Timer
NO, not needed (signal generator
program controls time)
Number of Programs
thousands, depending on software
Max. number of frequencies at
one time
depends on program used
Warranty
LIFETIME
* This is at a 50% cycle time. Machines with higher gauss
use cycle times of only 10% so for duration time you need
to balance gauss level with cycle time.
** Square wave recommended but any wave form the signal
generator program supports can be used.
*** Tested to 10,000hz. The best usable range is 7 -
2,800hz.
Structural design, low-voltage system and manufacturing by Tiverton Audio.©2019 All Rights Reserved. All trademarks are property of their respective holders.
3 Dec 2017 V1
22826 27
th
Ave NE
Arlington, WA 98223 USA
425.343.7976
[email protected]
Keep up with the latest information by visiting our blog:
26
■
5 to ±15,000Hz
Current design and manufacturing by Tiverton Audio ©2021 All Rights Reserved. All trademarks are the property of their respective holders.
* This is at 50% duty cycle (50% is the most any waveform can
generate).
Machines with higher gauss use cycle times of only 10% or
less, so for duration time you need to balance gauss level with
cycle time.
** Square Wave recommended, but any wave form shake the
signal generator program supports can be used.
Specificiations
