7
THE SIGNAL OUTPUT
CONNECTORS:
Each of the large coil sockets is a
bayonet-style, push-in-and-twist. It
must be twisted (clockwise) until it
clicks and latches to make good contact.
This is a heavy duty socket and it is OK
to plug or unplug it while a signal is on, if you need to, although
we recommend turning the
input signal off before unplugging a
coil.
ELEMENT Elite CAN STAND UP (MOBILE OPTION ONLY):
The foot on the top rear of the chassis is for standing the unit
up and is adjustable so the unit will stand straight up. There is
no problem operating the unit standing up if you want to. When
placed on a table, the ELEMENT Elite telescoping handle adds only
about
½
” to the overall height of the unit and hides completely
underneath when contracted. Important:
DO NOT LIFT THE UNIT
WITH THE TELESCOPIC HANDLE.
Instead, use the original handle
to lift it to and from the floor.
Be aware that if you operate it in this mode, it may kick up dust
or allergens from the floor.
ONE-COIL AND TWO-COIL OPERATION
You can use the ELEMENT Elite with one coil or both, depending
on your needs.
See the sections below on coil placement and on session type to
help you determine if using one or two coils is best for the type of
issue you wish to work on.
