27
Riveting tools/ Tension heads service and
cleaning
Caution
Hazard of injury if handled in an improper manner! On comple-
ting this work, there should not be any more hazard to the ope-
rator, if used as per the regulations. The operator may only
carry out the operations mentioned here. Maintenance and
service work not described in this operating manual may only
be carried out by trained specialists following instruction by
TITGEMEYER on the basis of the service instructions which
also exist. See the address on page 34 for more information
on service instructions and training.
Hazard of injury if the riveting tool falls down! The hydaulic
housing must always be kept dry, clean and oil- and fat-free.
Attention
Material damage due to corrosion! Do not use any highly active
cleaning agents or combustible liquids for cleaning purpose!
The following routine is recommended:
Clean riveting tool and tension heads after completion of cycle with this
type and check for mechanical defects.
After the riveting tool and the tension head have been cleaned and if they
are to be stored over a longer period of time, apply a little acid-free oil
(e.g. ELFOLNA 46) to all metal, outer components.
H
E
