15
Preparing the riveting tool
E
Note
Depending on the type of compressed air supply, it may be
necessary to connect a fitting different from the one provided,
to the riveting tool. For this, you need to have a fitting having a
1/4” Withworth pipe thread as per ISO 228.
Attention
Material damage by compressed air!
As per norm ISO 8573-1, class 2, compressed air must be dry
and clean. We recommend that you fit a compressed air-main-
tenance unit to the riveting tool.
• Compressed air hose should be connected to the swivel joint (11), as
prescribed.
Note
The operating pressure must be between a minimum of 5 and a
maximum of 7 bar!
11
