VS-32-L
8
Before the beginning of cleaning works and / or troubleshooting the
strapping head must be put out of operation. Main switch at
position
OFF.
Attention!
Strap may tear! Do not stand in the alignment of the
strap.
Wear eye and face and hand protection when eliminating fault
strappings
When cutting the strap hold the upper parts firmly
(see figure)
.
Attention!
The lower part of the strap jumps upward.
Consider the strong development of noise during longer
operations. Therefore, protect your health.
Exclusively use
original TITAN spare parts!
The use of spare
parts not made by TITAN excludes guarantee adjustments and
liability.
In automatic mode attention has to be paid that no squeezing
points may occur between the feeding installations (e.g. roller
conveyors) and the movable strapping unit.
We do not accept liability for alterations to the strapping
machine! Further, warranty/guarantee and these operating
instructions become inapplicable.
For safety regulations applying to
the TIG Inverter shield gas
welding unit see operating
instructions attached. TITANARG
L 250 TI
B 13 GB 07/10