VS-32-L
47
9.10. Dismounting and mounting the torch holder
To dismount the torch holder
(59)
relieve tension springs
(116)
by means of
spring hooks. Dismount torch
(505)
. Swing out sealing unit. Move torch holder to
welding position
pos. W
by manual actuation of
Y5
. Unscrew cover
(33)
.
Attention!
When removing the cover pay attention to the
pretension
of the
pressure springs
(67)
.
Remove bar
(66)
with screw
M4
. Move torch holder to zero position
pos. 0
by
means of manual actuation of
Y5
. Dismount pressure springs
(67)
. Swing out
torch holder by means of pusher
(42)
and detach link with bolt
(48)
. Remove torch
holder from sealing unit.
Mounting is performed in reverse order. Slightly lubricate torch holder on the
sliding surfaces.
Fig. 23: Swing out sealing unit.
Fig. 24: Remove bar.
Fig. 25: Dismount pressure springs.
Fig. 26: Swing out torch holder.
116
33
66
67
59
B 13 GB 26/06