VS-32-L
35
176
VS
32
VS
12
60
505
61
273
177
8.7. Setting the torch
The torch including holding device is set as follows:
Slip torch
(505)
including electrode into the setting gauge included
(273)
into the scope
of supply until the electrode is in contact with the bottom of the gauge. Slip holder
(60)
onto the torch till it reaches the stop of gauge
VS 32
and then screw it by means of
cylinder screw
(61)
.
Note!
If the clamping sleeve housing, the clamping sleeve or the welding
electrode will be exchanged separately, the adjusting of the burner
has to be controlled. Due to the modified constellation it is possible
that the distance between welding electrode and support of the
burner change.
B 13 GB 05/10