VS-32-L
37
9. Maintenance
9.1. General
Regular and careful maintenance provides for the permanent readiness for operation of
the strapping head of the type
VS-32-L
. The strapping head must always be kept clean.
Always keep strap guidance's and sealing sector free of pollution and foreign
substances.
The kind of packing material and its surroundings are decisive for
the cleaning intervals. Main attention has to be paid for abrasive
material originating from work with steel strap; that may result in
malfunctions.
For cleaning only use environmentally friendly cleaning agents
which neither damage plastic materials nor the painting on the
machine.
All parts must be checked at regular intervals and replaced when
worn out. Parts worn out affect the sealing strength and have
influence on the transport security of the packing item.
Attention!
Disregarding that note may result in faults and injuries.
Only use
original TITAN spare parts!
The use of spare parts not manufactured by TITAN excludes
guarantee and liability.
Caution!
In case of maintenance works on live parts of the strapping head
the main switch of the control system must be set to position “
0
“
and secured.
Tool inspection!
Perform a
daily
visual inspection of the outside of the unit. The early detection of
damaged parts extends the life of the unit. Replace all damaged parts
immediately
with Original TITAN spare parts.
B 13 GB 26/06