15
TTB579PLN
by TITAN
Before you start
GB
IE
Getting
started...
Fitting the blade (cutter) guard
> Familiarise yourself with the blade guard locating pivot pin (a), the groove (b)
and the blade guard limiting knob pole (c) situated on the side of the planer
out-feed table (13). (Fig. 7)
> Slide the guard arm and cutter guard assembly (27) over the locating pivot pin.
(Fig. 8)
> Tighten the locking knob (28) clockwise. (Fig. 9)
> Align the opening of the retaining collar (29 ) with the sharp-nose pliers (not
supplied) to the groove (b) on the blade guard locating pivot pin (a), then push
down the retaining collar (29), and secure it to the groove (b). (Fig. 10)
Fig. 6
Fig. 5
Fig. 8
Fig. 7
8
25
26
26
27
a
c
b
13