Fig. 46
Warning:
Never connect live or netutral wires to the earth terminal
of the plug. Only fit an approved 13 Amp BS1363/A plug and the
correct rated fuse.
Green/Yellow
13AMP fuse
approved to
BS1362
Brown
(live)
L
Cable grip
Blue
(neutral)
N
Outer sleeve
13 AMP
If you need to replace the fitted plug then follow the instructions below.
Important
The wires in the mains lead are coloured in accordance with the following code:
Green & yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows.
The wire which is coloured
green & yellow
must be connected to the terminal which
is marked with
E
or .
The wire which is coloured
blue
must be connected to the terminal which is marked
with N. The wire, which is coloured brown, must be connected to the terminal, which
is marked with the letter
L
.
Plug replacement
NOTE:
If a moulded plug is fitted and has to be removed
take great care in disposing of the plug and severed cable, it must
be destroyed to prevent engaging into a socket.
If the supply cord is damaged it must be replaced by a service
agent or a similarly qualified person in order to avoid hazard.
Care and maintenance
TTB579PLN
by TITAN
34
In
more
detail…
GB
IE