Trouble shooting
TTB579PLN
by TITAN
36
In
more
detail…
GB
IE
WARNING!
Only perform the steps described within these
instructions! All further inspection, maintenance and repair work
must be performed by an authorised service centre or a similarly
qualified specialist if you cannot solve the problem yourself!
Caution:
Troubleshooting could lead to an increased risk to the
operator due to the fact that safety guards / covers may have to
be removed. It is therefore particularly important that all the
measures necessary for safe working are taken.
Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore check the product using this section.
In most cases the problem can be solved quickly.
Trouble shooting
Problem
Possible cause
Solution
1. Machine will not
run
1.1 No mains voltage
1.2 Fuse blown
1.3 Overload switch has
cut in
1.4 Faulty On/Off switch
1.5 Carbon brushes worn
1.6 Faulty motor
1.7 Damaged mains lead
1.8 Safety interlock
switch is not correctly
engaged
1.1 Check the supply
1.2 Check the fuse and
replace if necessary
1.3 Allow the machine to
cool and reset the
switch
1.4 Check and replace if
necessary
1.5 Check and replace if
necessary
1.6 Check and replace if
necessary
1.7 Check and replace if
necessary
1.8 Check that the
extraction port is
correctly seated
2. Speed drops
whilst the
machine is
under load
2.1 Cutting depth is too
great
2.2 Feed rate is too fast
2.3 Dull cutter blades
2.1 Reduce the cutting
depth
2.2 Reduce the feed rate
2.3 Replace / sharpen
the cutter blades
