Unpack
> Unpack all parts and lay them on a flat, stable surface.
> Remove all packing materials and shipping devices if applicable.
> Make sure the delivery contents are complete and free of any damage. If you
find that parts are missing or show damage do not use the product but contact
your dealer. Using an incomplete or damaged product represents a hazard to
people and property.
> Ensure that you have all the accessories and tools needed for assembly
and operation. This also includes suitable personal protective equipment.
You will need
(items not supplied)
> Suitable personal
protective equipment
> Phillips screwdriver
> Sharp-nose pliers
> Combination square
(items supplied)
> 3mm, 5mm, 6mm Hex key (3pcs)
> 8 x 10mm Spanner (1 pc)
> Blade setting block (1 pc)
Fitting the rubber (anti-vibration) feet
> Carefully turn the machine upside down, taking care not to damage the in-feed /
out-feed beds.
> Fit the washers M8 (22) over the hex bolts M8 x 20mm (23) and push both through
the holes in the rubber feet (3).
> Fit the feet / bolts to the holes provided (1 on each corner of the machine).
> Secure using the 6mm hex key supplied.
15
TTB579PLN
by TITAN
Before you start
GB
IE
WARNING!
Do not connect to power supply until assembly
is complete. Failure to comply could result in accidental starting
and possible serious injury.
Getting
started...
